SE DNC CNC Communications/Editor Software Download Page

Download SE-DNC-Setup.exe

• Full/Trial version 2.8 MB
• Digitally signed
• Easy to uninstall

After the download is complete, go to your Downloads folder (Ctrl+J) and open SE-DNC-Setup.exe.

Trial mode will let you use all the software’s features for 60 days at no cost, no credit card number required.

Privacy Statement

• All information submitted to dncsoftware.com is used only to fulfill requested service
• No information is used for unsolicited sales or shared with third parties except payment processors
• Online purchases are processed by Square, see squareup.com for their privacy policies
• Credit card numbers are not stored on any dncsoftware.com server

Data Collection Disclosure

SE DNC software collects data to generate keys and improve performance and reliability. No personal information is sold or shared.

• BIOS: Serial number
• Computer System: UUID, Manufacturer, Model, Type
• Hard Drive: Serial number
• IP: Address and Geolocation
• Operating System: Caption, Hostname, Version
• Processor: Model
• RAM: Manufacturer, Part number, Serial number, Slot location
• Installed COM port information
• Software error log, update check log
• Feature usage statistics
• Hardware/software configuration
• (The contents of NC files and their filenames are never forwarded to remote server)

Purchaser agrees to the submission of computer ID data required to generate license keys.
Purchaser is advised that unless blocked, SE DNC software generates Internet traffic between itself and remote servers.
Temporary or cached data from NC files may be stored on your computer. If you need to wipe an NC file for security, you must also find and wipe the cached data.

We understand that privacy and data disclosure needs may vary. If you require specific accommodations, please reach out to our support team directly at support@dncsoftware.com or text (805) 419-0226. We’re happy to try to find a solution that meets your requirements.

Disclaimers

• Terms of Service apply
• Internet connection required for activation
• Microsoft® Windows® 10 or Windows® 11 is required
• HFOs, machine tool dealers, CNC service techs, and users in non-English speaking countries do not qualify for free trial
• IP addresses are checked; software sends PC information to remote server
• Haas CNC, Haas Automation, Haas are trademarks of Haas Automation, Inc
• Microsoft, Windows are trademarks of Microsoft
• All other trademarks cited on this website are the property of their respective owners
• Sihler Engineering / dncsoftware.com develops its own software and is not a software reseller
• Software is sold from this website only; resellers are not authorized
• Sihler Engineering / dncsoftware.com is in no way affiliated with any other company or entity

DISCLAIMER OF WARRANTY: THE SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL SIHLER ENGINEERING OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.